Press Install Cellular Module. 2. Two-way voice communication between the Central Station and the Monoxide sensors Select Fix All on the right side of the screen. RFAPM) Select a command phrase with an assigned Smart Scene. Carbon The system displays the Tools menu. 4. from the control, followed by the zone’s Voice Descriptor, if it is programmed. Adjust volume with the slider. The list of user codes reappears. user numbers with user codes. The most common cause of an alarm system not functioning when an intrusion or fire occurs is inadequate transferred to the device. SHOCK Programming Guide 1. Device Device Device Device documentation that you have attempted to contact your existing security dealer and that they have Follow instructions to download and install the free Lyric app. The audible alarms stop and Alarm Cancel is displayed. Advanced Zone Zone Zone Zone  guarantee that such will not occur or will not cause or lead to personal injury or property loss. OR Message Message Message Message Function Function Function Function Program Keys ................................................................................................................................................................................................. 16 CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE + Reboot .............................................................................................................................................................................................................................................................. 40 Allows the panel to dynamically select the IP addresses. If adequate signal strength cannot be achieved, External 123 Quick Exit When the system is armed, touch this button to start an exit delay. The following options are displayed: system, you may request that Honeywell remotely disable this feature. Entry Exit 1 24 Hour Audible Trouble Resident Monitor Keypad Once activated, the control advances to the next screen. Instant Mode sensor has been successfully paired with the control, the sensor’s green LED will Smoke could be blocked by the closed door. The system announces the Zone Description. system status and selection “icons” and 5. User 3 User Code Alert Language SOUNDING OF FIRE NOTIFICATION APPLIANCES. If there are none are saved, the list shows No BEDROOM At the bottom of the screen, you can Bypass All Faulted, which selects all zones with faults AWAY mode protects the entire premises, including interior motion detectors if Using the left “ “arrows select the Month and Date Time Select the “Reboot” button. 160 1 New Not Used Yes Disabled Button N/A When alarms or trouble conditions occur, the touch screen displays the zone number Bypassed zones are left unprotected. Select “Zone Description 1 or Zone Description 2”. NIC IP Address: Displays the communication device’s assigned IP address make sure that the RF signal from each transmitter is received with sufficient signal amplitude when the system The MAC ID is listed here when the app is first configured for use with Lyric. toggles between the available options. Dealer/Installer. the network. 3. Enabled Arm Stay NOTES: • A security code cannot be assigned more than once. They do The default setting is automatic video recovery. Message Message Message Message Function Function Function Function 30 Sec. system functions other than those they will be using. floor_plan-001-V1 Reset Master User Code 1. 84 • Selected cameras are highlighted and the Display option appears. The system displays the Link Not Ready There is a link but it is not ready (address not resolved). Important Note: A device must be Excluded before it can be moved to another network or re- The system displays the next available Key Zone Number. 30 Minutes 1 Hour Access to Smart Scenes for other users The Add New button appears only to the Master User. Medical If programmed, alerts your monitoring company to other types of emergency. Including Thermostats (Model RF9505-TDS) Supervision 24 Hours 24 Hours 24 Hours 24 Hours SiX™ Keypads Loop Loop Loop Loop To test the wireless part of the system and the RF receiver, perform the RF Sniffer Mode and Go- Enroll 5800 Devices Manually - Enter the 7-digit serial number printed on the e. Press Save. disconnecting battery. proper operation. 800-18078 7/15 Rev. Arming states include Depending on the type of panic alarm in effect, a keypad may appear immediately after the - 27 - Exit Delay can also be restarted by pressing Restart Timer. Software updates for the Lyric Controller are published periodically. 27 Press Add New and Name. entry is always wanted.) • Move the antenna leads away from any wire runs to the receiver/control. View Enrolled Devices View Enrolled Controllers Enter “Done”, when you are finished. WPS Choose Open, wpa/wpa2, WPA2 or WEP. 1st Floor Windows All Windows Interior Locations N No. NOTE: NOTE: NOTE: NOTE: Step 6 is only required if the Controller has not already been associated with an AlarmNet 360 2 Yellow, 2 White Fair -71 to -80 P/N 300-03864-3PIN (STANDARD CAPACITY) The zone list reappears, with the Bypass icon shown in the affected 3. Lyric-3G module is operating on the 2G Network and Lyric sounds Keypad The system toggles between “Log All Set” and “Press To Log All” transmission enrolls the serial number (which is displayed on the screen) and the